E4/E6 + 4201E Class 1/2


4000 A
Class 1: 4000 A
Helm E4/6 + 4300AE/CE + 4201PC15E
  1. Electricians’ helmet E4 (4 point textile harness) or E6 (6 point textile harness
  2. Visor carrier slot or universal:
  • 4300AE with slot system (30mm) for helmets with 30 mm slots
  • 4300CE with elastic rubber band for all helmets including those
  1. Visor 4201PC15E
    from 1,5 mm Polycarbonat, clear, Class 1, 4000 A
    from 1,5 mm Polycarbonat, green, Class 2, 7000 A

 

 

 

 

Certificates E4 / E6

Tested and certified according to:
  1. Helmets E4/E6
  • EN 397 + optional 440 VAC and - 30° C
  • EN 50365 EN Electrically Insulating Helmets
  • ANSI Z89: 2003: 20.000 Volts
  • GS-ET29 Electric Arc 4000 Amps for 0,5 seconds
  • Info: There is no exisiting norm for helmet testing under electric arc exposure.
  1. EN 166 2,1-2 (UV Protection), 3 Liquid Splash,, K = Antiscratch, B = Impact 120 m/sec
    8 = Electric arc according to GS-ET29
    - 4000 Amps Class 1 for 0,5 sec 4430 Standard
    - 7000 Amps Class 2 for 0,5 sec not tested yet

Electric Arc Tests

4201PC15E has been tested in March 2010 and had to resist against an electric arc at 4000 Amps for 0,5 sec. The attached pictures shows, that the wearer would not been hurted
by the arc, all sensors of the dummy showed that the measured heat was far below the danger zone of possible injuries. (Stoll research results).


T6E Helmet after PIP Test, 10.000 Amps for 1 sec. RWE Institute, Dortmund. Where other helmets just melt, T4/6 helmets keep their shap.